Product Description
SJ-D-4 1 in 4 Out Dome Type Fiber Optic Splice Joint Closure With 96 Cores
Purpose: aerial, direct-burying, wall
mounting, Pipeline laying way
Weight: 2.35-2.6kg(Dome type)
Material: PC
Dimension (mm): 43.5*19CM(H*D)
Cables Entry & Exit:1Entry 4Exit
Cable Diameter (mm): Φ8-Φ25
Sealing Structure: Heat shrinkable Sealing
Maximum capacity: Bunchy 12-96cores; Ribbon: up to
288cores;
Components: Seal tape 1PC,
Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 12PCS,
mental hook 1SET, seal fittings 1PC Labeling paper 1 PC, Special wrench 1 PC,
Buffer tube decided by customers
Environmental temperature: -40℃ to +65℃
Atmospheric pressure: 70∽106KPa
Optic property: The spare fiber coiled
in the fiber-emplacing device; the fiber connector will not attenuate during
the FOSC installation operation period.
Seal Performance: After the closures are
sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes,
there are no air bubbles; or observed for 24 hours, there is no change of air
pressure.
Re-encapsulation Performance: The closures are
pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no
air bubbles; Or observed for 24 hours, there is no change of air pressure after
three times of repeat encapsulation
Voltage-resistance
strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
Insulation
resistance: ≥2X104MΩ
Span-life: 20 years.
It is widely used for communication, network system,
cabled T.V. of CATV, the fiber optic cable by network
Uses and properties:
It is belonged to open structure airproof
tie-in system of machine pressure.
It is used for the protective connection
between two or more optical cables
Suitable for single core fiber optic cable and ribbon
fiber optic cable
.png)
Contact Now
