Product Description
GJS-25-6 3-in 3-out Dome Fiber Optic Splice Closure
GJS-25-6 is suitable for aerial, underground or direct-buried applications.
Features:
• Material: PC
• Weight: 3kg (erect type)
• Dimensions (mm): H 510 × D 220
• Cables Entry & Exit: 3-Entry, 3-Exit
• Cable Diameter (mm): Ø7-Ø25
• Sealing Structure : heat shrinkable sealing
• Max Capacity of Core:144 cores
• Atmospheric pressure: 70∽106KPa
• Environment Temperature: -40 °C to +85 °C
• Insulation resistance: ≥2X104MΩ
• Fire resistant, waterproof, and quakeproof
• Span-life: 30 years
Components:
• 1 piece of Seal tape
• 1 piece of Insulation tape
• 4 piece of Nylon ties
• 24 pieces of optical fiber heat shrinkable cable splice protection sleeves
• 1 set of mental hook
• 1 piece of seal fittings
• 1 piece of umeral bar
• 6 pieces of retaining rings
1. Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector wont attenuate during the FOSC installation operation period.
2. Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
3. Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
4. Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
5. It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
6. Uses and properties: It is belonged to open structure airproof tie-in system of machine pressure. It is used for the protective connection between two or more optical cables Suitable for single core fiber optic cable and ribbon fiber optic cable
.png)
Contact Now
